Asmaco Antigravel

Features :

Key Performance Properties:

• Does not contain bitumen and asphalt
• Reliable protection from pebbles, abrasive impact of dirt, sand, petrol, oils, water, and
salts.
• Resistant to temperature changes.
• Reduces noise inside a car.
• Highly adhesive.
• High spreading capacity.
• Compatible with all kinds of paints and lacquers.
• Makes car bodies last much longer.
• Spreading capacity (depending on coat thickness) is 2.5–3 м².
• Full drying time is 2 hours at t +20°C.

Applications:

• Protects the lower flanks of the car body against stones and corrosion.
• The film also largely absorbs noise and vibration.
• Anti-gravel below the bumpers and side panels of cars.
• Anti-resonance product in wheel arches and undersides of cars.

Direction For Use:

• Make sure that the underside of the car is completely dry, clean and free of grease. Cover
the parts that do not need a treatment.
• Shake the can for at least 3–5 min — it will make a coat homogeneous and prevent the
injector from being blocked.
• Shake the can from time to time when using.
• Spray to test.
• Hold the can upright. Apply a thin coat at 25–30 cm distance. For the best effect make
2–3 thin coats with 5 min intervals.
• To clear after use, turn can pointing nozzle up and away from user and activate for 1 or
2 seconds.

Restriction:

• Do not use this product if rain is imminent.
• Do not expose to temperatures exceeding 50°C
• Do not spray on naked flame or any incandescent materials.
• Keep out of reach of children.
• Do not pierce or burn even after use.
• It may burn above 50°C