Asmaco UPVC cement P 914
Product Details :
Asmaco UPVC cement P 914 is specially formulated medium-body high-strength solvent based adhesive used for cementing & joining applications of pipes and pipe fittings made of Rigid PVC (U-PVC). This adhesive meets the requirements of Standard ASTM D 2564.
Features :
Direction For Use:
• The surface to be bonded must be clean, dry, free from dust, grease and oil particles.
• Use of sand paper to make surface rough is recommended for better adhesion.
• Clean both surface ends thoroughly with Cleaner and clean using tissue paper or dry cloth.
• Stir the adhesive well and apply an even layer of adhesive (thin layer on fitting, thicker on pipe) with the help of brush. Assemble the parts within 4 minutes (at 23oC) without turning and hold firmly for few seconds.
• Wipe off excess adhesive. Assembled joint should not be disturbed for 5 minutes .
• Close container properly after application.
• Flush pipe with plenty of water after 24 Hrs to remove excess of adhesive before usage.
Precautions :
• After application of adhesive both the surface should be bonded immediately upon evaporation of solvent and before forming the skin on surface.
• Excess adhesive should be removed for better aesthetics.
• Use of primer / cleaner is recommended for better adhesion.
• Surface bonding time will vary from 1 minute to 5 minutes depending upon climate temperature.
Technical data
Packing
Certification
Chat with Us
